http://wiki.noaaport.net/ 2026-05-01T17:21:01-04:00 http://wiki.noaaport.net/ http://wiki.noaaport.net/lib/tpl/dokuwiki/images/favicon.ico text/html 2012-10-12T19:11:04-04:00 http://wiki.noaaport.net/doku.php?id=projects:nbsp:howtos:master-setup.readme&rev=1350083464&do=diff Master Setup A master is enabled by setting one or both variables set feature(nbs1server) 1 set feature(nbs2server) 1 in * features.conf No further steps are required for a machine to act as master. A more specialized master mode involves using a pure memory-based spool instead of the disk-based spool that is normally used. Such a mode is suitable for a setup in which one machine (the master) will act exclusively as an ingest machine without doing any processing itsel… text/html 2014-07-15T21:29:30-04:00 http://wiki.noaaport.net/doku.php?id=projects:nbsp:howtos:master-slave-settings.readme&rev=1405474170&do=diff Summary of the master and slave settings Settings in the master to write to clients Milliseconds to wait while writing to network clients, and how many more times to try if a timeout occurs: set client_write_timeout_ms 5000 set client_write_timeout_retry 2 text/html 2012-10-12T20:00:02-04:00 http://wiki.noaaport.net/doku.php?id=projects:nbsp:howtos:mspoolbdb-note.readme&rev=1350086402&do=diff Configuring a memory spool via nbspreconfigure The new way to configure Nbsp with a memory based spool for a pure ingest role (no processing but network aware and the inventory enabled), is to execute nbspreconfigure mspoolbdb It will copy the relevent configuration files to the directory text/html 2012-10-12T19:12:26-04:00 http://wiki.noaaport.net/doku.php?id=projects:nbsp:howtos:mspoolbdb.readme&rev=1350083546&do=diff Memory based spool See Note This file describes the alternatives to the default disk-based spool directory that holds the raw data files that are received and later sent to the filter and network server for processing and distribution. Nbsp supports the following spool configurations text/html 2014-07-12T22:17:37-04:00 http://wiki.noaaport.net/doku.php?id=projects:nbsp:howtos:nbspinsert.readme&rev=1405217857&do=diff Ingesting external data via Nbspinsert nbspinsert is a comand-line utility (tcl script) that can be used to insert an external data file in the Nbsp data stream, so that Nbsp will pass it to the filters and server as if it had been received from the noaaport receiver. This file outlines the instructions. text/html 2012-10-12T19:08:19-04:00 http://wiki.noaaport.net/doku.php?id=projects:nbsp:howtos:nbspupdate.wiki&rev=1350083299&do=diff Upgrading via Nbspupdate Nbsp can be upgraded easily. The first thing is to install the nbspadm package for your OS. That package contains the program nbspupdate which is used as follows. Executing nbspupdate without arguments, will check the version of the installed Nbsp package against the latest one available, and if the latter is newer than the former it will download it. The Nbsp package can then be upgraded manually as usual. Alternatively, executing text/html 2012-10-12T19:08:19-04:00 http://wiki.noaaport.net/doku.php?id=projects:nbsp:howtos:slave-setup.readme&rev=1350083299&do=diff Slave Setup Starting with nbsp-2.0, a slave can read from several masters simultaneously. The intention is that a slave can be configured to receive different sets of products from different providers. To setup a network slave, the following settings must appear in the file text/html 2014-05-11T09:18:47-04:00 http://wiki.noaaport.net/doku.php?id=projects:nbsp:howtos:two-card-config-linux.notes&rev=1399814327&do=diff Two card setup in Linux Assuming that eth0 is the external interface and eth1 is connected to the receiver, then 1. Disable eth1 in NetworkManager 2. In rc.local * In SL, Centos (redhat clones) ifconfig eth1 <ip> pointopoint 10.0.9.54 * In Debian